Forum Navigation

New Posts

Search

RT Social Links

Facebook Page

Facebook Group

Reel_time on Twitter

These are the 70 most used thread tags
Tag Cloud
2strokes 2003 amberjack bluefin tuna bluefish boating boca grande bonefish breachway buzzards bay cabo san lucas caicos cancun cape cod canal cape cod times chatham cod conservation dorado everglades false albacore fishing fishing report flounder fly fishing flyfishing fly rod sage fly tying gear gear review grand cayman great white grouper haddock hub jewfish kayak kenai landlocked salmon mackerel magdalena bay massachusetts fishing menhaden new england fishing peacock bass redfish regulations rigging rio bonefish line roosterfish sahd shad shark shore access smallmouth snook soliman bay striped bass strippers sunglasses swordfish tags tampa tarpon trailering trout tuna gear wachusett wahoo walleye
  #1  
Old 09-26-2003, 03:31 PM
THE GAME THE GAME is offline
Registered User
 
Join Date: Aug 2003
Location: DEEP South Texas
Posts: 66
Casting Intermediate Lines?

I am getting practiced up for the surf. I have my new 10wt with 10wt airflo WF10 I line.I don't no if it is inherent of these lines but I can't seem to tighten up the loops.Unless i pile drive it with a whip at the end of the cast like I am trying to throw it threw a wall.With the big loops the fly makes a big circle at the end of the cast.Instead of traveling on the same plain as the line.
Anybody got any suggestions ?
__________________
THE GAME

Reply With Quote
  #2  
Old 09-29-2003, 08:45 AM
Animal Chris Animal Chris is offline
Registered User
 
Join Date: Nov 2002
Location: Nassau Bay and Key Allegro, TX
Posts: 207
My 2 cents.....

I had the same problemand I confronted Lefty Kreh with the question. His response was with sinking lines, you don't want to throw tight loops. Because of the dynamics of sinking lines, a tight loop actually works against you. If you open your loop up a little I think you will get a better delivery.
__________________
Tight Loops,
Animal Chris

"Fly fishermen are born honest, but they get over it." Ed Zern
Reply With Quote
  #3  
Old 06-03-2004, 08:46 AM
Sagebrush's Avatar
Sagebrush Sagebrush is offline
Registered User
 
Join Date: Apr 2002
Location: Chatham
Posts: 374
Hello,

Just got back from MA. Native texan though. I used the 10 wt Airflo quite a bit. You are running up against a few challenges. First the diameter of the line is large so it catches the wind and creates more friction through the guides. Also the line is somewhat limp so it will sag a bit between the guides and it does not transfer energy as well as a stiffer line. Although the limper line is easier to manage. Finally your probably running up against onshore winds.

My advice is keep the line well lubricated and work on your timing. A tighter loop is going to give you more distance. Deeper water makes it difficult to cast well as will larger flies. You might consider a tapered leader to help your fly unroll better.

If the taper of the line is large you may be false casting more line than needed. Lines that taper to a skinny running line should be cast closer to the head and shot.

While the 10wt Airflo is a great line for a lot of situations, you might also consider getting a mild sinking line. Airflo makes some good ones 250 to 300 grain will work better with larger flies and wind. You can use more bouyant flies and leader length to control depth. Also a floating or intermediate "running line" might be better for the surf. Sci angler has a pink and black 275 with a floating running line. It works well in the surf. Look for the smallest diameter tip and running line, also whether it is a cold or warm weather line.

Cold weather lines are going to act more like spaghetti than a garden hose in the texas heat.

Some would scoff at this combination, however as long as it doesn't feel like your dragging an anchor across the bottom (large diameter, heavy sink), You'll have a wind beater that casts quickly and efficiently.

Of course in skinny water over moss this type of line won't work well.

Regards,

Sagebrush.
Reply With Quote
  #4  
Old 06-03-2004, 08:58 AM
titleguy titleguy is offline
Registered User
 
Join Date: Before Nov. 1999
Location: Bangor Maine
Posts: 681
I have a couple of older orvis monic lines for colder water ( the blue ones) which are braided mono core intermediates and they shoot like crazy as long as you haul and don't take more than two or three false casts at most. They have a relatively slow sink rat 2"/ sec I think, but I have had great success with them for distance. They need a good stretching at the beginning of the day and use a basket. As for sinking lines, RIO Deep Sea is it IMHO I have a 250, 350, 450 for 8,9,10 respectively and all cast great.
Reply With Quote
  #5  
Old 06-13-2004, 10:12 PM
wittich wittich is offline
Registered User
 
Join Date: Feb 2004
Posts: 154
Clear intermediate

I find the clear intermediate lines difficult to cast. I changed to the Scientific anglers quad tip. the small diameter running line cuts through the air and teh 30 foot clear tip still produces lots of hits.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bought a 15 ft. fly rod bigblue Tackle Forum 42 11-26-2002 08:33 AM
free casting instruction + more Quicksilver New England 2 06-13-2002 10:38 PM
Advice on multi-tip lines Gil Tackle Forum 2 09-26-2000 10:52 AM
Clear intermediate lines zabilan Tackle Forum 3 07-19-2000 03:22 PM
Lines, lines & more lines Roop Tackle Forum 13 02-11-2000 04:30 PM



All times are GMT -5. The time now is 05:54 PM.




vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.


Copyright ©1995-2009, Namemedia Inc.